Category ->
CENTRIFUGAL PUMPS ->
CENTRIFUGAL PUMPS TYPE / VMK
CENTRIFUGAL PUMPS TYPE / VMK
|
APPLICATIONS
- Building Service
- Mining
- Booster
- Water Service
- Industries
- Fire service
|
FEATURES
- Since TAKASAGO unique multivolute casing disign is adopted, higher efficiency is guaranteed over a wide range of capacities, as compared with the conventional turbine pumps furnished with guide vanes.
- Thrust force acting on the shaft is balanced with the piston. All impellers dynamically balanced. Precisely machined shaft and sealed grease lubricated ball bearings permit a stable operation. Therefore, the pumps will be operated for a long time without any noise and vibration.
|
SPECIFICATIONS
|
|
Size (Suct. x Disch.) |
: 40 ( 1- 1/2 in.) ~ 250 mm (10 in.) |
Capacity |
: 0.1 ~ 9 m3/min. |
Total head |
: 10 ~ 220 m |
Revolution |
: 50 Hz 1450 rpm 60 Hz 1750 rpm |
|
: |
Rotation |
: CW from motor side |
Liquid |
: Fresh water of equibalent |
Temperature |
: 0 ~ 70 oC |
Suction lift |
Option : |
|
70 ~ 80 oC : Hot water type |
|
80 ~100 oC : Water cooled type |
|
|
|
Max. suction pressure |
: 3 kgf/cm2 |
Rotation |
: CW from motor side |
Impeller |
: Closed, Cast bronze |
Casing |
: Cast iron |
Shaft |
: Stainless Steel ( Size 40 ~ 80 ) Carbon steel ( Size 100 ~ 250 ) |
Sleeve |
: Cast bronze |
Shaft Seal |
: Gland Packing, asbestos graphite |
Bearing type |
: Grease lubricated ball |
Flanges |
: Suct. ; JIS 10 kgf/cm2, RF Disch.; JIS 10 kgf/cm2 , RF |
|
Type |
Size : mm. |
Stages |
Head (m.) |
Capacity ( L/min ) |
HP |
404 |
1.5 x 1.5 |
4 |
22 - 36 |
100 - 230 |
3 |
405 |
1.5 x 1.5 |
5 |
28 - 50 |
100 - 230 |
3 |
406 |
1.5 x 1.5 |
6 |
30 - 60 |
100 - 230 |
5.5 |
407 |
1.5 x 1.5 |
7 |
40 - 95 |
100 - 230 |
5.5 |
409 |
1.5 x 1.5 |
9 |
40 - 80 |
100 - 230 |
7.5 |
4010 |
1.5 x 1.5 |
10 |
45 - 105 |
100 - 230 |
10 |
503 |
2 x 2 |
3 |
20 - 30 |
100 - 380 |
5.5 |
504 |
2 x 2 |
4 |
24 - 45 |
100 - 380 |
5.5 |
505 |
2 x 2 |
5 |
26 - 57 |
100 - 380 |
5.5 |
509 |
2 x 2 |
9 |
55 - 115 |
100 - 380 |
10 |
|
|